Home Public Safety Fire Dighton Fire Reminds Residents to Check Smoke and CO Detectors During Daylight Saving Time

Dighton Fire Reminds Residents to Check Smoke and CO Detectors During Daylight Saving Time

5 min read
0
0
8

Daylight Saving Time Ends Nov. 3 at 2 a.m.

DIGHTON – Chief Christopher Maguy and the Dighton Fire Department encourages residents to test their smoke and carbon monoxide detectors when setting their clocks back for daylight saving time. 

Daylight saving ends Sunday, Nov. 3 at 2 a.m.

“When daylight saving time occurs twice per year, it serves as a good reminder for residents to change the batteries in their smoke and carbon monoxide detectors and check to ensure they’re working properly,” Chief Maguy said. “We’d also like to remind residents that they should be replacing their detectors at least every 10 years.”

According to the International Association of Fire Fighters (IAFF), working smoke alarms decrease the risk of dying in home fires by nearly half. Additionally, in many reported home fires in which smoke alarms were present but did not operate, the batteries had been removed or the alarm was disconnected due to dead battery alerts or nuisance alarms.

The Dighton Fire Department also asks that all business owners not only change the batteries in their clocks, smoke or carbon monoxide detectors, but replace the batteries on wall mounted emergency lights and exit signs. All businesses should have emergency backup lighting as a safety feature to provide temporary lighting in case of power failure.

In order to keep your family and home safe, Dighton Fire recommends that residents follow safety tips outlined by IAFF:

  • Install smoke alarms inside each bedroom, outside each sleeping area and on every level of the home, including the basement. On levels without bedrooms, install alarms in a central location or near the stairway to the upper level. Smoke alarms should be installed at least 10 feet from cooking appliances to minimize false alarms.
  • CO alarms should be installed in a central location outside each sleeping area and on every level of the home and in other locations where required by applicable laws, codes or standards.
  • For the best protection, interconnect all smoke alarms. When one smoke alarm sounds they all sound. CO alarms can also be interconnected.
  • Test smoke and CO alarms at least once per month using the test button.
  • Smoke alarms with non-replaceable 10-year batteries are designed to remain effective for up to 10 years. If the alarm chirps warning that the battery is low, replace the entire smoke alarm right away.
  • Smoke and CO alarms with replaceable batteries need a new battery at least once per year. Replace batteries during daylight saving time or if the alarm chirps warning that the battery is low.
  • When replacing a battery, follow the manufacturer’s list of usable batteries on the back of the alarm. Manufacturer instructions are specific to the batteries that must be used and the alarm may not work properly if a different kind of battery is used.
  • Replace all smoke alarms according to the date on the back or when they reach 10 years old. Replace CO detectors according to the manufacturer’s instructions.
  • Make sure everyone in the home understands the sound of a smoke and CO alarm and knows how to respond.

For more information on smoke detector and CO alarm safety, visit the IAFF website or contact the Dighton Fire Department at 508-669-6611.

###

Load More Related Articles
Load More By Leah Comins
Load More In Fire

Leave a Reply

Your email address will not be published. Required fields are marked *

Check Also

Dighton Police and Fire Departments Offer Halloween Safety Tips

Police Chief Robert MacDonald and Fire Chief Christopher Maguy would like to offer residen…